PVC MARBLE SHEET raw material is PVC, high quality, panel could be
bended and flexible,It has many features,such as Excellent chemical
and corrosion resistance,Excellent impact strength,Excellent
formability,High rigidity and superior strengh,Reliable electrical
insulation,Easy to clean, cut and install (use glue is ok, no more
nails glue); Glossy; Formaldehyde-free;No radiationWi. Widely used
in living room, kitchen, washing room, bedrooms. kitchen rooms,
schools, hotels,factories...
Product name | 1220x2800mm Interior Decorative PVC Marble Sheet |
Material | Pvc material |
Size | 1220mm*2440mm,1220mm*2800mm |
Thickness | 2mm~6mm |
Technology | Heat transfer printing, uv curing |
Design | Marble grain, wood grain, solid color and 3D design. Accept
Customized design. |
Feature | Environmental protection,fire-retardant(B1 class),waterproof,wear
resistant(3H), non-formaldehyde, high glossy,ideal material for
interior decoration |
Delivery Time | Within 7-20 days after the order confirmed with deposit |
PVC marble sheet has 4 mainly layers:
1. Heat transfer film: high-quality transfer film, high simulation,
clear texture.
2. UV coating wear resistant: TOP A quality UV paint, bright color,
prolong the service life of the panel.
3. PVC base board: High-density environmentally friendly base
material, stable and compressive, and outstanding environmental
performance.
4. PE protect film: Cover the surface with PE film to protect the
surface from scratche
How to Install UV Marble Board ?1.The bottom layer of the confimation and clean the bottom to be
fully dry,so that the bottom level.Remove dirt and rubbish.The
bottom layer,please use the gypsum board or the magnesium plate and
the surface smooth and waterproof material plate.
2.Marking and Positioning
In accordance with the size of the decoration,the shape of the
bottom line,positioning.
3.Double side tape adhesive bonding tape at the tixed position,hard
pressed to make its cement.
Usage:the wall is about 3.3/m2 of the ceiling is about 4.3/m2.
4.Adhesive glue
Cut the hose glue bottle mouth,leaving the cigarette weight(about
7mm) the width of the exit,and then squeeze the glue,(tape beside
the position in the adhesive glue into a wire bound usage on the
wall about 0.5 A/m2 the ceiling about 0.6A/m2.
5.Double sided adhesive tape for the removal of the adhesive tape
Stripping,remove the Separation of paper.
6.In 10 minutes after the bonding of the decorative plate,the
decoration plate is bonded to the fixed position.The position of
the hands to press the tape,to make it fully bonded.Please note
that you can not move or re-bond.
7.Maintenace of 1 days during the course of the adhesive glue.
